Quick Overview

Graco Reactor H-XP2 for use with polyurea coatings. Graco hydraulic reactors include a range of features that make them the perfect choice for polyurea applications. The Reactor H-XP2 includes a variety of useful features that allow for more efficient applications, reducing downtime and increasing productivity. The standout choice for coatings requiring high-pressure applications. To enquire or for more information, contact our vastly experienced team today.

Call Us to Order

Spray Plant (2K) Ltd are a long established leading specialist supplier of paint spraying equipment, spares and accessories in the UK. If you require any help or advice, or wish to place your order over the phone, please call 0113 263 4433. Alternatively, you can send an email to [email protected]. Don't forget, we offer free delivery on orders over £100 ex. VAT! (excluding hire equipment)

Additional Information

SKU AP3404
Condition New
Machine Heater Wattage 15,300 watts
Machine Max Hose Length 94 m (310 ft)
Machine Max Working Pressure 240 bar (24.0 MPa, 3500 psi)
Machine Material Coatings


Key Features

  • Dependable; robust, durable, longest life spray system
  • Reduced downtime; allows for longer time in between required maintenance
  • Increase daily productivity; capable of extremely high duty cycle
  • Easy to reach, conveniently-placed electronics
  • Advanced control technology
  • Tracks, monitors and saves project data
  • Data can be saved and downloaded onto a USB drive
  • Stores up to 24 chemical recipes
  • Drum level indicators
  • Quick and easy troubleshooting thanks to QR code shortcuts
  • Sacrificial surge protector; Protects your electronics against excessive power spikes
  • Ergonomic set-up; electronics are above the pumps with a comfortable working height for easier service
  • Consistent design; similar footprint to traditional H-series
  • Reversing sensors; non-contact for longer life
  • Voltage jumpers; available on H-30 and H-XP2 (Inside electronics cabinet), allows for one model to be wired to different voltages
  • Horizontal Pump Line; slower cycle rate

Applications & Materials

The Graco H-XP2 is suitable for applying a wide range of polyurea protective coatings, particularly for projects requiring waterproofing. Common applications include:

  • Potable water tanks
  • Truck bedliners
  • Adhesives and caulks
  • Marine and shipbuilding
  • Wastewater treatments
  • Waterproofing
  • Roof Coatings
  • Roof & Wall Insulation
  • Polyurea
  • Spray Polyurethane Foam

Compatible Products

  • Graco Fusion Guns
  • Probler P2
  • Reactor Heated Hose
  • T1 & T2 Transfer Pumps

Technical Specifications

  • Manufacturer: Graco
  • Model: Reactor H-XP2
  • Amperage (A):35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
  • Application: Protective Coatings
  • Applicator Type: Manual
  • Compatible Material: Plural Components
  • Component Type: Two-Component
  • Flush Type: Solvent
  • Frequency (Hz): 50/60
  • Material Application: Polyurea
  • Maximum Flow Rate (GPM): 1.5
  • Maximum Fluid Temperature (°F): 190
  • Maximum Hose Length (ft): 310
  • Maximum Mix Ratio: 1:1
  • Maximum Working Pressure (MPa): 24.1
  • Maximum Working Pressure (psi): 3500
  • Overall Depth (in): 20.88
  • Overall Height (in): 63.3
  • Overall Width (in): 32.96
  • Power Rating (HP): 20.11
  • Power Rating (W): 15000
  • Power Rating (kW): 15
  • Power Source: Hydraulic
  • Pressure Type: High Pressure
  • Product Type: Plural Component
  • Resin Inlet Size (in): 3/4
  • Resin Inlet Thread Gender: Female
  • Resin Inlet Thread Type: NPT
  • Sound Pressure Level (dB(A)): 82.6
  • Type: Proportioning System
  • Wetted Material(s): Aluminum, Brass, Chrome, Fluoroelastomer, PTFE, Stainless Steel, UHMWPE, Zinc-Plated Carbon Steel

You may also be interested in the following product(s)