GRACO Reactor A25 Foam Insulation Sprayer Rental

Quick Overview

Rental of foam spraying equipment can be much more cost-effective than buying outright when frequent use is not required. For this reason, We offer an insulation foam machine rental service to cover one-off projects.

Foam insulation sprayer rental includes:

  • Graco Reactor A25 Unit

  • Air Purge (AP) Graco Fusion Gun

  • Graco Husky Diaphragm Pump

  • 15m Graco Heated Hose (3m whip)

Manufactured by Graco, the Reactor A25 unit is ideal for foam applications and has been engineered to deliver consistent temperature control and better quality foam, even when you’re spraying at maximum flow rates. Additional heated lines must be purchased separately. Heater jackets are also available.

Spray Plant 2K offers a wide range of equipment for rental for the application of polyurethane, polyurea and plural component materials. As foam applications are specialised, please contact us before ordering as a few details will be required before we can confirm your order. For more information or help finding the best equipment for your project, please contact us by email or by calling 0113 263 4433.

A full specification for the Graco A25 can be found below.

Call Us to Order

Spray Plant (2K) Ltd are a long established leading specialist supplier of paint spraying equipment, spares and accessories in the UK. If you require any help or advice, or wish to place your order over the phone, please call 0113 263 4433. Alternatively, you can send an email to [email protected]. Don't forget, we offer free delivery on orders over £100 ex. VAT! (excluding hire equipment)

Additional Information

SKU H1001
Condition Used


Key Features

  • Maintains temperature setpoints for better yield
  • Maintains consistent output pressure for uniform spray pattern
  • Easy to operate and maintain
  • Best choice for affordability and durability
  • DataTrak Control
  • Resettable counter tracks material usage
  • Three Heat Zones
  • Three independent heat zones – ISO, resin and hose heat
  • Provide accurate heat control for reliable spraying to handle different chemical viscosities
  • Digital temperature controls
  • Recirculation Manifold
  • A quick, easy way to balance system pressures
  • NXT Air Motor
  • Low air consumption for increased efficiency
  • Muffler provides low operating noise levels
  • Air valve provides smooth and rapid changeover
  • Quick Knockdown Lower Pumps
  • For easy disassembly and maintenance

Reactor A25 Specification

  • Air Inlet Size (in): 1/2
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
  • Application: Spray Foam
  • Applicator Type: Manual
  • Compatible Material: Plural Components
  • Component A Inlet Size (in): 3/4
  • Component A Thread Gender: Female
  • Component A Thread Type: NPT
  • Component B Inlet Size (in): 3/4
  • Component B Thread Gender: Female
  • Component B Thread Type: NPT
  • Component Type: Two-Component
  • Flush Type: Solvent
  • Frequency (Hz): 50/60
  • Includes: Proportioner, Heated Hose
  • Material Application: Polyurethane Foam
  • Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
  • Maximum Air Inlet Pressure (psi): 125
  • Maximum Flow Rate (lb/min): 25
  • Maximum Fluid Temperature (°F): 190
  • Maximum Fluid Viscosity (cP): 1500
  • Maximum Hose Length (ft): 210
  • Maximum Mix Ratio: 1:1
  • Maximum Working Pressure (MPa): 14
  • Maximum Working Pressure (psi): 2000
  • Minimum Fluid Viscosity (cP): 250
  • Overall Depth (in): 24.5
  • Overall Height (in): 43.5
  • Overall Width (in): 21.5
  • Phase: 1, 3
  • Power Rating (HP): 12.07
  • Power Rating (W): 9000
  • Power Rating (kW): 9
  • Power Source: Air
  • Pressure Type: Low Pressure
  • Product Type: Plural Component
  • Sound Power: Level (dB(A)): 80.1
  • Sound Pressure Level (dB(A)): 70.2
  • Type: Proportioning System
  • Weight: 310lbs / 140kg
  • Wetted Material: Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon