Graco XP70 HF Plural Component Sprayer - 572102 - FX6002

Quick Overview

Cart-mounted Graco XP HF metering system complete with 50-litre side hopper. The Graco XP range enables two-component spraying at an affordable price with improved technology for maximum efficiency.

With its innovative engineering, the Graco XP70 allows for greater flow capacity allowing you to complete jobs faster but with reduced wear and tear. Flexible mix ratio, pressure and flow rate settings make the Graco XP70 HF the ideal choice for single projects that require multiple spray guns or larger tip sizes, as well as those undertaking a variety of separate projects that require different spray materials. The ratio can be adjusted simply by changing out one or two pump lowers.

This system has been configured specifically for Sherwin Williams FX 6002 Intumescent coatings and similar products. More details, including benefits and specification, can be viewed below.

Call Us to Order

Spray Plant (2K) Ltd are a long established leading specialist supplier of paint spraying equipment, spares and accessories in the UK. If you require any help or advice, or wish to place your order over the phone, please call 0113 263 4433. Alternatively, you can send an email to [email protected]. Don't forget, we offer free delivery on orders over £100 ex. VAT! (excluding hire equipment)

Additional Information

SKU	572102-FX6002
Condition	New

Details

GRACO XP HF PLURAL SPRAY SYSTEM FOR SHERWIN WILLIAMS FX 6002 INTUMESCENT COATINGS

Graco XP HF Benefits

Price includes 1 x full day’s training with our experienced team + delivery to our site
High-pressure performance for two-part high-solids coatings
Greater efficiency: Reduced material waste & maintenance costs
Consistent material quality - no more guesswork or human error in measuring materials
Easy to operate; simpler applications with comfortable handling and minimal training required
Pressure ratio shutdown system
Cost-effective; save money by using less clean-up solvent, as well as benefitting from reduced maintenance costs
Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

Materials

Polyurethane & Polyurethane Coatings
Plural Component Protective Coatings
Epoxy Coatings
High Solids Coatings
100% Solids Coatings
Urethanes

Industries & Applications

Roof Coatings
Rust Proofing
Shipbuilding & Marine
Bridge Construction, Maintenance & Protective Coatings
Railway Manufacturing and Repair
Towers for Wind Turbines
Pipe and Tank Coating
Structural Steel Coating
Water Tower Protective Coatings
Wastewater Treatment
Manhole and Sewer Reconditioning
Secondary Containment Spill Prevention
Corrosion Control
Offshore Rigs

Graco XP70 HF Technical Specification

XP70 manual & full specification: available on request
Product identifier: 572102 - FX6002
Air Inlet Size: 1 inch
Air Inlet Thread Gender: Male
Applicator Type: Automatic Airless, Manual Airless
Compatible Material: Protective Coatings, Primer, Epoxies, Polyurethane, Two-Component Coating, Solvents
Product Type: Plural Component Sprayer
Configuration: Cart-mounted Graco XP HF metering system complete with 50 litre side hopper
Fluid Inlet Size: 1-¼ inches
Fluid Inlet Thread Gender: Male
Fluid Outlet Size: 1/2 inch
Fluid Outlet Thread Gender: Female
Material Application: Coatings, Paints, Primers
Maximum Air Inlet Pressure: 0.69 MPa, 100 psi
Maximum Air Pressure: 0.69 MPa, 100 psi
Maximum Cycle Rate: 40 CPM
Maximum Flow Rate: 3 GPM, 11360 cc/min
Maximum Fluid Temperature: 160°F / 71°C
Maximum Fluid Viscosity: 20,000 cP
Maximum Hose Length: 300 ft
Maximum Operating Temperature: 130°F / 54°C
Maximum Spray Pressure: 50 MPa
Maximum Spray Pressure: 7,250 psi
Maximum Working Pressure: 49 MPa
Maximum Working Pressure: 7,100 psi
Measuring Type: Fixed Mechanical Positive Displacement
Minimum Fluid Viscosity (cP): 200
Mix Accuracy: +/- 5%
Mix Ratio: 1:1
Number of Tanks: 2
Dimensions: Height: 62”, depth: 52”, Width: 35”
Power Source: Air
Weight: 485lb / 220kg