Graco T1 Transfer Pump (Complete System)

Quick Overview

Graco transfer pumps maintain performance in any environment and are the ideal choice from the transfer of low-viscosity and medium-viscosity materials. Whether you’re using a Graco reactor or any other spray machine, transfer pumps are necessary for feeding chemicals to any equipment requiring fluid transfer.


The Graco T1 Transfer Pump is suitable for lower-output spraying applications, but any projects involving continuous spraying will require either a T2 Pump or Husky pump.


You should always consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing the best transfer pump for your project. For more support with this, please contact our dedicated team who will be happy to help:


All of our T1 Pump kits include:



  • 2 x T1 Pumps

  • 2 x Riser Tubes

  • Required Hoses

  • Connection Kits

  • Desiccant Kit


A complete guide to using the T1 2:1 Ratio Transfer Pump can be downloaded at the bottom of this page. More information incuding a detailed specification, uses and materials can be found below.


 


 

Call Us to Order

Spray Plant (2K) Ltd are a long established leading specialist supplier of paint spraying equipment, spares and accessories in the UK. If you require any help or advice, or wish to place your order over the phone, please call 0113 263 4433. Alternatively, you can send an email to [email protected]. Don't forget, we offer free delivery on orders over £100 ex. VAT! (excluding hire equipment)

Additional Information

SKU 247955
Condition New

Details

Features of the T1 Transfer Pump

The T1 Transfer Pump incorporates a range of features for more efficient fluid transfers by reducing both time and costs. Key features include:

  • Provides consistent feed pressures and flow rates for dependable results

  • Lower pressure drops with higher viscosity materials at any ambient temperature

  • Designed and manufactured by Graco

  • Longer lasting pump - designed for durability with less maintenance

  • Quick-release bung adapter for easy drum removal without interference from hose connections

  • Stainless steel wetted parts for corrosion-resistance

  • PTFE seals for improved performance and less maintenance

  • Durable and reliable; long-lasting quality for cost-effective

  • Improved o-ring seal design

  • Compatible with 7” job trailers

  • Quick-disconnect feature allows easier drum removal and faster change-outs.

  • Improved fluid intake easily handles higher viscosity materials – even in cold conditions

 

Common Applications & Suitable Materials

Graco T1 Pumps are suitable for various applications including fluid and spray foam transfers, as well as waterproof coatings and linings.

Applications:

  • Plural component material supply

  • Polyurea coatings

  • Polyurethane foam applications

  • Fluid transfers

  • Polyurethane foam

  • Tank and pipe linings

Materials:

  • Isocyanates

  • Catalysts

  • Adhesives

  • Resins

  • Polyurea

  • Polyurethane

 

T1 Pump Specification

  • U.S. Metric 

  • Pressure ratio: 2.1

  • Maximum fluid working pressure: 2.5 MPa, 25 bar

  • Maximum air inlet pressure: 1.2 MPa, 12 bar

  • Pump cycles per 1 gallon (3.8 litres): 40

  • Maximum recommended pump speed (continuous operation): 100 cycles per min (150 cycles per min. intermittent)

  • Gallons (liters) per pump cycle: 0.095 litres

  • Air consumption: See Performance Chart on page 27 of product documentations

  • Maximum ambient temperature: 50° C

  • Maximum fluid temperature: 82° C

  • Wetted parts: Stainless Steel, PTFE, PEEK

  • Fluid recirculation port: 3/8 npt(f)

  • Air inlet port: 1/4 npt(f)

  • Fluid outlet port: 1/2 npt(f)

  • Weight: 8.4 kg

  • Sound Pressure: 0.55 MPa, 5.5 bar

  • Sound Power, per ISO 9614-2: 0.55 MPa, 5.5 bar

  • Dimensions: 51.5 in / 130.8 cm (whole pump, see page 25 of product documentation for more details)

 

Compatible Products

Graco T1 Transfer Pumps are suitable for use with a wide range of Graco spray guns and Reactor Units including the below. For more information or to enquire about any of these additional products, please contact our team.

  • Fusion CS Spray Gun

  • Fusion AP Spray Gun

  • Probler P2 Spray Gun

  • Reactor Heated Hose

  • Reactor E-10 Spray Unit

  • Reactor E-10hp Spray Unit

  • Reactor A25 Spray Unit

  • Reactor H-XP2 Spray Unit

  • Reactor 2 E-30 Spray Unit

Available Download Links